Cloud Sprinkler Wi-Fi Configuration

agroGlide logo
CLOUD SPRINKLER

Cloud Sprinkler Wi-Fi Setup

The Cloud Sprinkler Wi-Fi setup can be done using either the keypad or a phone.

When using the phone, the Cloud Sprinkler acts as a Wi-Fi access point, allowing you to connect directly to it. This feature is only available when the Wi-Fi setup option by phone is selected in the Cloud Sprinkler and will deactivate after some times.

🔧 Option 1: Setup via Controller (Keypad & Display)

Use the built-in keypad to manually enter your Wi-Fi password.

  1. Go to Settings → Wi-Fi → Wi-Fi Setup → By Keypad.
  2. Select your Wi-Fi network from the list.
  3. Use the keys to enter your password:
    • Key “>” – Switch between lowercase, uppercase, numbers, and symbols.
    • Keys “+” or “–” – Rotate through characters within the selected character type.
    • Enter – Confirm and add the selected character to the password.
    • Key “<” – Delete the last character.
  4. After entering the full password, scroll the cursor to Set under the display.
  5. Press Enter to register and save the new password.
  6. Wait for the confirmation message ✅.

📱 Option 2: Setup via AgroGlide App

Fast, simple, and convenient using your smartphone.

Step 1 — On the Controller:

  1. Go to Cloud Sprinkler Settings → Wi-Fi → Wi-Fi Setup
  2. Wait for Preparation Mode

Step 2 — On Your Smartphone:

  1. Open the AgroGlide App
  2. Go to Settings → Wi-Fi Configuration
  3. Tap Check Cloud Sprinkler to find your device
  4. Select your Wi-Fi network
  5. Enter your Wi-Fi password
  6. Tap Configure Wi-Fi Credentials to finish setup

💡 Tips

  • ✅ Make sure Local Network Access is enabled on your phone.
  • 📶 Keep your phone near the controller during setup.
  • 🔁 If setup fails, try again.
  • 🕓 Keep pressing the Back button on the Cloud Sprinkler to return to the Home Menu.

☁️ Add Your Cloud Sprinkler to Your AgroGlide Account

Once your Cloud Sprinkler is connected to Wi-Fi, link it to your AgroGlide account in just a few steps:

Step 1 — On the Cloud Sprinkler

  1. Go to Settings → Link on your Cloud Sprinkler and press Enter.
  2. You will see a QR Code containing your device’s unique ID and other information.

Step 2 — On the AgroGlide App

  1. Open the AgroGlide App → Settings → Add Device.
  2. Tap Scan Device QR Code and scan the QR code displayed on your Cloud Sprinkler.
  3. Enter a Name for your controller.
  4. Set the Location by tapping Set Location. This ensures accurate local weather data for smart irrigation scheduling.

💡 Tip

  • Make sure your phone has camera permission enabled for QR scanning.
  • Keep pressing the Back button on the Cloud Sprinkler to return to the Home Menu.
  • Accurate location setup improves watering efficiency based on local weather.

🏠 View Your Cloud Sprinkler on the App

Once your Cloud Sprinkler is connected to your account, it will appear on the Home Page of the AgroGlide App.

You can add unlimited Cloud Sprinklers to your account, giving you full control over multiple controllers from a single app.